3 Best First Flush Diverters for 3- and 4-Inch Rainwater Pipe
Compare first flush diverters by round-pipe size, chamber setup, auto-drain design, and fitting risks so the initial roof runoff stays out of storage.
rainwaterguide
3 Best Downspout Filters for Rainwater Harvesting
Compare downspout filters by downspout size, mesh design, adapters, debris handling, and installation needs so rainwater reaches storage with less roof debris.
How to Reset Water Pump Pressure Switch?
Reset a pump pressure switch only after correcting low water, lost prime, power, or pressure faults. Follow the manual and verify cut-in and cut-out.
Is 70 Psi Too High for Water Pressure?
Seventy PSI is high but often below residential limits. Confirm local rules and fixture ratings, measure static and flowing pressure, and control pressure creep.
How to Tell If a Water Pump Pressure Switch Is Bad?
A bad pressure switch may fail to start or stop the pump, chatter, arc, or operate at wrong pressures. Check power, gauge, tank charge, tubing, and contacts safely.
How to Set Air Pressure in a Water Tank?
For a pump pressure tank, drain water and set air below the switch cut-in as specified. Ordinary vented storage tanks need no pressure setting.
Is a 30/50 or 40-60 Pressure Switch Better?
A 30/50 switch eases pump demands; 40/60 gives stronger pressure when supported. Compare fixtures, elevation, tank precharge, and system ratings.
Is a 20 Gallon Pressure Tank Big Enough for a House?
A 20-gallon pressure tank may suit some homes, but nominal volume is not drawdown. Size it from pump flow, runtime, switch range, demand, and space.
Is 90 Psi Too High for Residential Water Pressure?
Ninety PSI is generally too high for residential plumbing and strains fixtures, hoses, valves, and appliances. Test it and use a suitable regulator.
What Are Some Common Problems with Foot Valves?
Foot valves can clog, leak, stick, corrode, or admit air, causing lost prime and weak flow. Correct sizing, screening, submergence, and access reduce trouble.