Category Irrigation & Garden Use

Automatically water plants from a rain barrel with a low-pressure timer or pump controller, filtered outlet, suitable drip zones, and moisture-aware scheduling.

Gravity-fed water gains about 0.43 psi per vertical foot before friction losses. Learn how elevation, pipe size, fittings, filters, and flow affect pressure.

A 4-inch pipe's GPM depends on material, slope or pressure, length, fittings, and allowable velocity. Learn why diameter alone cannot determine exact flow.

Build gravity-fed irrigation with elevated storage, screened water, a suitable outlet, large supply tubing, low-pressure emitters, short zones, and safe overflow.

Gravity creates about 0.43 psi of water pressure per vertical foot. Learn how to measure elevation and account for friction and changing tank level.

A gravity-fed system develops about 0.43 psi per vertical foot before losses. Calculate static pressure, then account for pipes, filters, and flow.

Thirty psi may exceed the preferred inlet pressure of some drip systems but suit others with regulation. Check tubing and emitter ratings, flow, and zone design.

A 2.5 GPM well may serve modest demand with adequate storage and recovery, but household peaks can exceed it. Learn how yield, tank size, and use interact.

A water pressure of 120 psi is high for typical household plumbing and may stress fixtures and appliances. Learn how to verify it and assess regulation.

Drip irrigation does not always need a pump if gravity or supply pressure meets emitter requirements. Learn how elevation, regulation, flow, and zone size decide it.