Category Tank Fittings & Plumbing

A rain chain should span from the roof or gutter outlet to just above its basin or drain. Allow for attachment, tension, splash control, and secure anchoring.

A 20-gallon tank's cleaning depends on water source, use, light, temperature, sediment, and contamination. Inspect and clean when conditions require.

Clean gutters at least twice yearly, then adjust for nearby trees, storms, roof grit, guards, and overflow. Regular inspections reveal when more service is needed.

Water-tank slab thickness depends on filled weight, footprint, soil, reinforcement, and local requirements. Use engineered guidance, not a universal thickness.

Replace water filters by rated time or capacity and sooner when flow, pressure, taste, odor, or appearance changes. Water quality and use set the interval.

Clean a rain barrel once or twice yearly and sooner for sediment, algae, odor, insects, or dirty runoff. Inspect screens, outlets, and seals at the same time.

Choose a ball valve by pipe size, connection, material, pressure, temperature, flow bore, access, and water compatibility. Match it to service needs.

Attach PVC pipe to a rain barrel through a compatible bulkhead fitting. Drill accurately, seat the gasket, support rigid pipe, and leak-test the connection.

Attach a rain-barrel overflow hose to a sealed, screened fitting near the top, using adequate diameter and continuous slope to route excess water to a safe outlet.

Connect rain barrels with supported PVC, matched bulkhead fittings, level connections, and unions for service. Size pipe for balancing flow and test every joint.