Category Tank Fittings & Plumbing

Understand tank plumbing from inlet and overflow to valves, outlets, pumps, and vents. Plan compatible fittings, safe routing, access, and maintenance.

Add a rain-barrel overflow with a sealed fitting and screened pipe routed to a safe outlet. Size it for inflow and keep discharge from foundations and paths.

Set a rain-barrel spigot inches above the bottom to leave sediment space while keeping containers and hoses usable. Balance access, pressure, and dead storage.

Install a rain-barrel bulkhead fitting through a correctly sized hole with the gasket on the proper side. Tighten evenly, support plumbing, and leak-test it.

Bronze ball valves suit corrosion-prone outdoor service, while brass can be economical and available. Compare alloy, water compatibility, pressure, and cost.

Camlock fittings vary by size, type, material, gasket, pressure rating, and thread. Check every interface rather than assuming similar-looking parts fit.

An Oregon case involved jail after violations tied to large reservoirs and water rights, not ordinary rain-barrel use. Understand the facts and check local rules.

IBC fittings vary in valve outlets, thread standards, sizes, camlocks, and adapters. Identify the tote's exact connection before buying compatible parts.

Tank overflows are not universally sized. Match outlet diameter, thread, fitting type, inflow capacity, screen, and discharge pipe to the container.